w|fiveighty

The following tutorial shows how to flash and apply patches to your phone W580i Cid 52 with setool2 lite..

The following tutorial was taken and ported from Se-nse by a_k_s_h_a_y

** IMPORTANT NOTICE **

SliderWithStyle.com and its members are not to be blamed for any mishaps and/or damages done to your phone by following this, and any of our tutorials available on the site. This tutorial has been proven to work by members of SliderWithStyle.com and many others. If you do not trust us, or the software, you are free to not take this risk. As long as this tutorial is closely followed, nothing should go wrong.

Software(s) listed in this tutorial are NOT made by any of us. However, the software is provided 'AS IS', and no warranties are given. Use at your own risk.
Smart advice: Try downloading WITHOUT a download accelerator for safety and stability, as they are known to corrupt some downloads.

General Info..

Using patches you can improve the features of your phone and also change the graphics of the phone. You can remap folders in FS to phone memory and change acoustics, camera drivers and other stuff easily. With patches you can also disable many messages and bypass them to continue. For example you can bypass the “Insert handsfree message” to start the radio without the handsfree. And many more.

Patch is a piece of code which is applied to the Main firmware. By Applying a patch the parts of main firmware are modified. Main firmware consists of many flash blocks. Each flash block has an address and information stash. A patch is applied to a particular flash block to change the variables and codes in the flash block. A patch contains the address of the flash block to be patched and the code to be changed in a flash block.

Patching with db2020 bypass security takes lots of time. Hence den_po came with the idea of quick access patch and implemented in his Jdflasher. Which was then taken by the_laser and implemented in his Setool 2 lite.

Files needed..

• Setool2 lite edition

• Patches for your phone

• Main

• FS

• Custom Pack

Files to Download

  Setool 2 lite

Procedures...

• Connect phone

• flash phone

• Bypass security

• Use auick access patch

• Apply patch.

The Tutorial...

First install USB FLash drivers if you have not installed. To install USB Flash drivers check download section..

Backup GDFS using SeTool 2 lite.

GDFS Backup The Most Important Step...

1. Start Setool 2 lite
2. Shutdown phone. Reinsert battery.
3. Choose Your phone in Phone type. Click Read GDFS.
4. Connect phone to Setool 2 lite holding C
5. Wait for few seconds.
6. When Setool is done it says “Elapsed:xx secs” , Then unplug phone. Reinsert Battery.

Note: Backup of GDFS to be made only for the first time. Backup GDFS once with Setool 2 lite and also once with XS++ if you have not done yet. Then store your GDFS safely. You can also go through GDFS backup in tutorial section for more on gdfs.

Apply Quick Access Patch..

First we enable quick access patching for your firmware using db2020 security bypass and from then on apply other patches using quick access patch.

Drag and Drop your Main Firmware on qamaker.exe , it will generate the quick access patch .vkp for your firmware. Qamaker is included in the Setool 2 lite download archive.

Now start SeTool 2 Lite
In Files box click add and add the main firmware you used to generate quick access patch.

Now in Misc Files click ‘….’ and add the quick access vkp patch generated.

Check Bypass db2020 Security ! Press Flash. Reinsert Battery and connect phone holding C.
Wait for db2020 security bypass operations

When done setool 2 lite asks you to unplug phone, reinsert battery, Press READY and then connect phone holding C. Do it in order, Correctly.

SeTool 2 lite Flashes the Main. When main is flashed it starts to apply the patch.
It asks you to Click NO to apply the patch and YES To Remove the Patch. Hence Click No. Wait for a few minutes. Patching will complete and you have successfully applied the quick access patch.

Once you applied quick access patch you apply all other patches by the method given below

Patching..

Find out patches for your firmware. If your firmware is a W580 R8BE001 then look out for W580 R8BEoo1 patches.

Copy the code in notepad and click ’save as’ and in Save as type choose >> ‘All Files’ and then save it as >> patchname.vkp give any name of your choice

Start Setool 2 lite. Select Phone Model. Check use “quick access” patch.

In Misc Files click ‘….’ and select the patch that you want to apply. the patch that you just now saved as patchname.vkp

Click Write Script.



Reinsert battery and connect phone holding C. Then setool 2 lite asks you to click No to apply the patch and click yes to remove the patch. Hence click no. If it says some patch values differs then click yes and continue applying the patch.

The patch will be then applied. After patching is done setool 2 lite says .vkp executed disconnect phone reinsert battery and start your phone.

Also go through the video tutorials included in the setool 2 lite 1.1 archive. !

You must also know how to extract an FS because some patches require that you place some files in M2 Card. Such as to use a patch that replaces /tpa/preset/system/desktop to /usb/other/flash

you must first create folder “flash” in Other folder in phone using file manager and then copy the contents of FS/tpa/preset/system/desktop To /usb/other/flash and then apply the patch or else phone might fail to start the menu !!

IMPORTANT >>> IF you are using Google Translator then be careful while copy pasting patch. It Copies the same code twice and patch will go wrong. Copy the patches from Russian site without using google translator !


Important >> Always press correct button. Many have killed their phones by pressing Write GDFS instead of Write Script. See that you press Write SCRIPT button while patching !

Side note: If your patch appears to have failed to be patched using setool2lite, you might want to try JDFlasher. Certain patches can only be patched by certain software. :)

Thanks to den_po !! for quick access patch method and also for releasing patching for free ! hence laser released !

Credits of Video Tutorials to Respective Owners Mentioned in the VIdeo ! Thanks to Them !